Oil and gas recovery industry news_Environmental policy and emission standard updates

The news section of the oil and gas recovery industry tracks environmental protection policies, updates on emission standards, and industry trends related to oil and gas recovery at gas stations and oil depots, helping owners to grasp compliance requirements in a timely manner. It is compiled and published by Luoyang Wohong Petrochemical Equipment Co., Ltd.

Industry News

What does the environmental protection department inspect when checking the oil and gas recovery at gas stations? Daily inspection preparation checklist

The inspection content of environmental protection departments for oil and gas recovery at gas stations is relatively fixed. This article outlines the key inspection points, provides a checklist for daily inspection preparation, and highlights the precautions to be taken on the day of inspection.

Industry News

What should I do if the reading of the oil and gas recovery concentration detector drifts? Calibration cycle and key points of calibration

The drift in readings is often caused by sensor zero drift, probe contamination, and temperature and humidity interference. This article clarifies the judgment between drift and true increase, as well as the calibration cycle and key points for calibration operations.

Industry News

What should one pay attention to when buying second-hand oil and gas recovery equipment? Pre-transaction checklist and risk warnings

Used oil and gas recovery equipment has a wide price range and many potential hazards. This article provides a checklist for pre-transaction verification, common risk points, and contract considerations.

Industry News

What should we do if the electricity bill for the oil and gas recovery device is getting higher and higher? Reasons for increased energy consumption and methods to reduce it

When electricity costs rise, we should first calculate the electricity consumption per ton of recycled products and then conduct a segmented investigation. Common reasons include deteriorated heat exchange, pump wear, pipeline resistance, and oversized equipment selection. This article clarifies the investigation sequence and points for reducing consumption.

Industry News

The oil and gas recovery device is still operating, so why is the emission concentration getting higher and higher?

The normal operation of equipment indicator lights does not necessarily indicate normal recovery. A slow increase in emission concentration often indicates hidden performance degradation. This article clarifies common causes and segmented troubleshooting methods.