Oil and gas recovery technology article_Three-stage recovery principle and selection guide

The "Oil and Gas Recovery Technology" article column shares insights into the working principles of three times of oil and gas recovery, a comparison between condensation and adsorption processes, key points for equipment selection, and experiences in achieving emission standards under GB 20952. These insights have been compiled by the technical team of Luoyang Wohong Petrochemical Equipment Co., Ltd.

Company News

How to maintain the appearance and rust prevention of the three-stage oil and gas recovery equipment? Maintenance points and manufacturer's supporting services

In oil and gas areas, moisture and corrosion coexist, and the appearance and rust prevention maintenance of equipment are often overlooked. This article outlines the key points of maintenance and the manufacturer's supporting service arrangements.

Technical Article

Do diesel filling stations also need to install vapor recovery systems? What is the difference between them and gasoline stations?

Whether to install a diesel station is determined based on its scale and local requirements. Due to the low evaporation rate and low recycling value of diesel, the configuration can be simplified. This article clarifies the criteria for determination and the differences between diesel and gasoline.

Industry News

How to troubleshoot the failure of starting the oil and gas recovery equipment? The inspection sequence of power circuit and controller

If the equipment fails to start, troubleshoot from the periphery to the core: check the power supply air switch fuse, emergency stop interlock, controller signal, motor, and pump body. This article clarifies the inspection sequence and key points for repair reporting.

Company News

How to deal with abnormal noise and high vibration of oil and gas recovery equipment? Inspection points for fan bearing and pipeline fixation

Abnormal noise and vibration are often caused by three root causes: wear and tear of rotating parts, looseness, and surge flow. This article clarifies the identification methods, key inspection points for fan bearings and pipeline fixation, as well as the disposal and recovery process.

Technical Article

How to design the slope of the oil and gas recovery pipeline at gas stations? Key points for condensate flow control and installation

The slope of the recovery pipeline directly determines whether the condensate can flow smoothly back to the storage tank. This article discusses the approach to determining the slope design value, low point treatment, and key points for installation and acceptance.