Oil and gas recovery technology article_Three-stage recovery principle and selection guide

The "Oil and Gas Recovery Technology" article column shares insights into the working principles of three times of oil and gas recovery, a comparison between condensation and adsorption processes, key points for equipment selection, and experiences in achieving emission standards under GB 20952. These insights have been compiled by the technical team of Luoyang Wohong Petrochemical Equipment Co., Ltd.

Industry News

What should we do if the electricity bill for the oil and gas recovery device is getting higher and higher? Reasons for increased energy consumption and methods to reduce it

When electricity costs rise, we should first calculate the electricity consumption per ton of recycled products and then conduct a segmented investigation. Common reasons include deteriorated heat exchange, pump wear, pipeline resistance, and oversized equipment selection. This article clarifies the investigation sequence and points for reducing consumption.

Company News

What should one pay attention to when purchasing three sets of vapor recovery equipment? A checklist from configuration verification to acceptance

This article expands on five key aspects when purchasing equipment: process combination, processing capacity matching, supply of vulnerable parts, factory data accuracy, and after-sales response. It presents a checklist that can be used as a reference.

Technical Article

How to choose among three oil and gas recovery processes: membrane separation, condensation, and adsorption?

Condensation is suitable for high-concentration oil recovery, membrane separation is suitable for medium and low-concentration enrichment and control, and adsorption is suitable for deep treatment. This article clarifies the division of labor and combination selection ideas among the three.

Industry News

The oil and gas recovery device is still operating, so why is the emission concentration getting higher and higher?

The normal operation of equipment indicator lights does not necessarily indicate normal recovery. A slow increase in emission concentration often indicates hidden performance degradation. This article clarifies common causes and segmented troubleshooting methods.

Company News

Is it normal for the oil and gas recovery device to start and stop frequently three times? How to set the starting pressure?

Frequent start-ups and shutdowns often result from a low starting pressure setting or a high gas-liquid ratio. Prolonged continuous operation will accelerate equipment wear and tear. This article clarifies the setting approach and debugging methods.