Company News_Project delivery progress and company news

The company news section of Luoyang Wohong Petrochemical Equipment Co., Ltd. releases updates on project delivery progress, manufacturing chronicles, technical exchanges, and team dynamics, documenting Wohong's development journey in the field of oil and gas recovery equipment.

Company News

How to prepare the budget for oil and gas recovery renovation? Cost composition and manufacturer assistance process

The budget for the oil and gas recovery renovation was prepared roughly, leading to either overspending or omissions during implementation. This article breaks down the composition of the renovation costs and provides steps for budget preparation and the process of manufacturer assistance.

Company News

What should be paid attention to during the renovation of oil and gas recovery at gas stations? Potential issues that are prone to occur during the construction phase

During the renovation phase, there are four types of potential hazards that are easily overlooked: insufficient pipeline slope, missing liquid collection tanks, misuse of seals, and superficial debugging. This article provides a construction checklist and key acceptance points.

Company News

How to conduct the shift handover for the three-time oil and gas recovery equipment? What are the key points of the handover content and record

Shift handover is a crucial aspect of the continuous operation of oil and gas recovery equipment. This article outlines the handover content, steps, and key recording points, and explains the supporting services that manufacturers can provide.

Company News

What should one pay attention to when purchasing three sets of vapor recovery equipment? A checklist from configuration verification to acceptance

This article expands on five key aspects when purchasing equipment: process combination, processing capacity matching, supply of vulnerable parts, factory data accuracy, and after-sales response. It presents a checklist that can be used as a reference.

Company News

Is it normal for the oil and gas recovery device to start and stop frequently three times? How to set the starting pressure?

Frequent start-ups and shutdowns often result from a low starting pressure setting or a high gas-liquid ratio. Prolonged continuous operation will accelerate equipment wear and tear. This article clarifies the setting approach and debugging methods.