Oil and gas recovery technology article_Three-stage recovery principle and selection guide

The "Oil and Gas Recovery Technology" article column shares insights into the working principles of three times of oil and gas recovery, a comparison between condensation and adsorption processes, key points for equipment selection, and experiences in achieving emission standards under GB 20952. These insights have been compiled by the technical team of Luoyang Wohong Petrochemical Equipment Co., Ltd.

Industry News

How to read the emission concentration of membrane oil and gas recovery? Detection data and comparison approach

The detection figures of the emission outlet serve as a report card for the effectiveness of the device. This article explains where to measure the data, how to interpret the readings, and what to check first if the readings exceed the standards.

Company News

What are the site requirements for a skid-mounted membrane separation device? Layout and interface checklist

The premise for the rapid mobilization of skid-mounted devices is that the site preparation is in place. This article lists the site conditions, interface checklist, and layout considerations.

Technical Article

Why has membrane-based oil and gas recovery become mainstream? Comparison and selection of three generations of recovery technologies

The three generations of technologies, namely cryogenic, adsorption, and membrane separation, each have their strengths and weaknesses. This article compares them from four dimensions: recovery rate, energy consumption, safety, and land occupation, and provides guidance on how to make a choice.

Industry News

How to inspect a membrane separation oil and gas recovery device? Trend analysis of pressure difference and handling of common abnormalities

The inspection of membrane devices revolves around pressure difference, vacuum degree, and temperature before the membrane. This article explains the daily inspection items and disposal ideas for common abnormalities.

Company News

How to implement the membrane separation oil and gas recovery solution? From site survey to device commissioning

Before implementing the membrane separation solution, it is necessary to understand the gas volume, concentration, and site conditions. This article describes the complete process from survey to commissioning and acceptance.