Oil and gas recovery technology article_Three-stage recovery principle and selection guide

The "Oil and Gas Recovery Technology" article column shares insights into the working principles of three times of oil and gas recovery, a comparison between condensation and adsorption processes, key points for equipment selection, and experiences in achieving emission standards under GB 20952. These insights have been compiled by the technical team of Luoyang Wohong Petrochemical Equipment Co., Ltd.

Company News

How to conduct on-site inspections for three oil and gas recovery projects? Inspection content and plan output process

On-site investigation is the first step in project implementation. This article describes the content list, recording methods, and scheme output process for three rounds of oil and gas recovery project investigations.

Technical Article

How to handle condensate accumulation in the oil and gas recovery pipeline after three times? Troubleshooting and dredging methods for gas blockage and liquid blockage

Failure to discharge condensate can lead to gas blockage and liquid blockage. This article explains the signal judgment, troubleshooting, and prevention methods for condensate accumulation in the three-stage oil and gas recovery pipeline.

Industry News

How to arrange the instrument calibration for the three-time oil and gas recovery equipment? Determine the cycle and manage the records

Instrument inaccuracy can lead to misjudgments in operation. This article explains the scope, frequency, and record management of instrument calibration for three-time oil and gas recovery equipment.

Company News

How to conduct the follow-up visit for the operation of the oil and gas recovery equipment for three times? The content of the follow-up visit and the closed-loop management of issues

Operational follow-up is an extension of service delivery. This article describes the timing, content composition, and problem closure methods for three follow-up visits to oil and gas recovery equipment.

Technical Article

How to troubleshoot the abnormal noise during the operation of the oil and gas recovery device for three times? Judgment on the source of the abnormal noise from the fan and compressor

Abnormal noise is a precursor signal of device malfunction. This article explains the common sources and troubleshooting methods of abnormal noise from fans and compressors in oil and gas recovery devices.