Oil and gas recovery technology article_Three-stage recovery principle and selection guide

The "Oil and Gas Recovery Technology" article column shares insights into the working principles of three times of oil and gas recovery, a comparison between condensation and adsorption processes, key points for equipment selection, and experiences in achieving emission standards under GB 20952. These insights have been compiled by the technical team of Luoyang Wohong Petrochemical Equipment Co., Ltd.

Technical Article

How to conduct liquid resistance detection for the oil and gas recovery system at gas stations? Practical instructions on pressure difference interpretation and blockage point investigation

Liquid resistance detection serves as a direct means to assess the patency of the recovery pipeline. This article elucidates the timing of detection, criteria for interpreting pressure differences, and the sequence for troubleshooting blockages.

Industry News

How to prevent leakage at the oil unloading and vapor recovery interface? Daily practices for seal management and unloading port maintenance

Eighty percent of oil unloading leaks occur at the connections. This article explains the graded management of seals, daily maintenance of oil unloading ports, and early detection methods for leaks.

Company News

How to handle sudden failures of the oil and gas recovery device for three times? Key points for the connection between shutdown sequence and emergency plan

The key to handling device trips and alarms lies in a clear sequence. This article explains the shutdown sequence, reporting path, and key points for plan coordination in fault handling.

Technical Article

How to troubleshoot the high emission concentration of the oil and gas recovery equipment for three times? Conduct a step-by-step inspection from interface leakage to condensation temperature level

If the emission concentration is high, it is important to first distinguish whether it is due to a problem with the device or a change in operating conditions. This article provides a step-by-step troubleshooting sequence from the collection port to the condensation temperature level and the subsequent checks.

Industry News

How to control the emission of oil vapor during oil unloading at gas stations? Key points of operation and abnormal situation handling for oil vapor recovery during oil unloading

Oil unloading is the period with the most concentrated oil and gas emissions in the station. This article explains the operational key points of oil unloading gas recovery, tank monitoring coordination, and common abnormality handling.